The 3 Benefits of Being Equipped with the Right Torch for Camping


When campers start packing their bags, most of them make sure to pack the big stuff first and then pass to the smaller essentials. Nevertheless, many tend to forget the importance of one accessory that has a great role in making their camping trip safer and more convenient – a quality torch. But how do you find a good torch for camping that will suit your needs and budget? With a bit of research on the matter, and of course, with our help.

First of all, start by figuring out what the best brands in that industry are and take a look at their models. Although some of them may offer torches that are a bit more expensive, with a quality torch in your hands you’ll have a peace of mind knowing that you have a reliable source of light that won’t let you down in the darkness. That’s just one benefit of a good torch for camping, now let’s take a look at the rest of them.

Powerful source of light

There is no doubt that LED lights far outweigh the advantages of regular lights. Not just that they have a longer lifespan but they are more efficient as well and that’s just one of the things that make them the perfect choice for camping and other outdoor activities. Camping in the middle of nowhere can be very fun and exciting but also a bit scary once the sun sets. Having the right flashlight will make your experience much more pleasant and safer.

Long lasting

서해바다 사진, 이미지, 일러스트, 캘리그라피 - 크라우드픽

A regular flashlight can go out of power in a very short time, which can be a huge deal breaker when you are out there in the forest on your own. With LED camping flashlights, however, you can have a peace of mind as they can last 60 to 80% more than regular flashlights. The bulbs in LED torches last longer and all you need to do before leaving your home is to ensure that the battery is fully charged (if you use a rechargeable flashlight) or to pack an extra set of batteries.


An emergency tool

No matter how comfy and equipped your campsite may be, there can still be some problems, like the electricity going out. This is where your high-quality camping torch will come to the rescue. You can use it to instantly illuminate your space or as a tool to signal other people that you are there and in need of help. Some models of torches come with some very special features like SOS for exactly those kinds of situations.

Read More
8 Survival Uses for a Flashlight

Survival Uses of a Flashlight

There are many survival uses for a flashlight. Walking in a dark alley, a lonely street, a forested area or a dark parking lot can bring chills down your spine. This is because you don’t know what is lurking in the dark. If you have ever been in this situation before, then you know how crucial it is to have a flashlight, especially when you hear some strange sounds from a nearby bush or suspect to see a shadow of a person in a corner.

People in such situations wish they had a safety weapon with them such as a flashlight. In this case, not just any type of flashlight is good. There is a big difference between a normal light and a survival light. Tactical Flashlight Guide give the user a wide range of uses than normal flashlights. They can be used for illumination, self-defense, blinding an attacker, in emergency situations, and even to start a fire.

The advancement in technology has enabled flashlights brands to come up with compact, sturdy, lightweight and brighter flashlights. This makes things easy for Preppers as they don’t have to carry heavy and large flashlights for their lighting needs. Most of the tactical flashlights are portable and durable. They are made with lighter materials, but can withstand tough weather conditions.

The difference between a normal flashlight and a tactical flashlight

Tactical flashlights have a totally different role than a normal flashlight. Initially, tactical flashlights were created to be utilized in conjunction with a firearm to help with target identification in places where there is limited lighting. Instead of carrying a separate flashlight, it would enable the marksman to target a weapon and illuminate a target at the same time.

Another area where tactical lights were used was by the police and security. Tactical flashlights were a wonderful innovation as they could offer a concentrated light beam that could temporarily blind an attacker or suspect and assist with target identification. This field of use meant that the tactical flashlight had to be made differently from the normal flashlight. This is because normal flashlights are made with cheap materials like plastic, and would not provide the same durability as with a tactical flashlight. Let’s export other survival uses for a flashlight.

8 Survival Uses for a Flashlight

Tactical flashlights provide a wide range of uses that you won’t get from a normal flashlight. Also, unlike other survival weapons, tactical flashlights are portable and are allowed on all modes of transport making it easy for travelers around the world to carry them. Here are some of the uses of tactical flashlights:

  1. Provide illumination in the dark

No one knows what challenges awaits them ahead until they encounter it. For this reason, you should always have a tactical flashlight with you as you go hunting, hiking, traveling, or even as you carry out your daily activities. Today’s tactical flashlights are usually small, bright, and convenient to carry.

Having a tactical flashlight might save you as you go home late at night in the dark. It will illuminate your path or alley. Also, if you arrive home when there is a blackout, you can use the flashlight to light your room. Furthermore, if your car breaks down in the middle of nowhere, you can always remove the darkness to change the car tire.


  1. Disorient an attacker

Walking at night is very risky as you are likely to encounter a thief or an attacker or even a stray animal. If you are in such a situation and have a tactical light, you can always switch to the strobe mode and blind the attacker or animal. This will leave them confused as you make up your mind what to do next. Be very cautious before blinding any person with this mode. Not every person who is walking or running at night is an attacker.


  1. Start a fire

The survivalist can use a flashlight to make a fire in different ways. This may not be the primary use of this device, but it can help you to-do-so.

The first method is to take out the protecting glass on top of the flashlight in blazing sunshine. Then, hold it in the air between the sun and the tinder. After a few minutes, sunshine will converge and burn the tinder.

The second technique is to remove the head and the protecting glass. Then, break the bulb and not the filament. Afterward, put the tinder in and switch the light on.

The third and final method is available for only a few types of flashlights. The flashlight should have a very intense light that is capable of burning flammable materials. Simply turn the mode on and thrust your flashlight near the tinder.


  1. Provide light for shooting in the dark

Many tactical flashlights are used in shooting as they are designed to be mounted on guns. If you want a tactical light just for shooting, you can go for those that have rail mounts. Night vision scopes alone do not provide perfect light in very dark areas and thus shooters prefer having a tactical light to help out in such scenarios. Tactical lights provide more light so that you will have a faster target attainment.

When using the light for shooting, you should hold it in the appropriate position to avoid being hit.

  1. Provide light in extreme weather conditions

A survival flashlight can come in handy in many extreme situations. Imagine if a storm broke out and you had to be left in the dark? A flashlight will provide you with light until the issue is rectified. In addition, tactical flashlights are usually waterproof and can be used even when it’s raining. Normal lights can’t survive extreme weather conditions like rain, water, and extreme temperatures. In case you drop this light accidentally on tarmac or on a hard surface, it will still function as it is normally shockproof.


  1. Self-defense tool

After disorienting an assailant, now what? If an assailant is armed, you have to disorient them and hit them before running for safety. Almost all tactical flashlights are made with a hard strike bezel on the front of the flashlight. This part can as well be used to break the window if you have locked the keys inside the house or car.

  1. In emergency situations

As you go for your wild expeditions, something out of the norm might happen and make you look for help. Instead of screaming or waving at cars on the road, you can use the SOS mode to signal for help. This includes when you are lost in the forest or when there is a fire outbreak or any other kind of emergency situation that requires help. Use it well and it is advised that you should not switch on the light for long as it may as well attract bad people.


  1. Surveillance tool

A survival flashlight provides more uses than just providing light. It can be used to survey your camp at night or even for hunting animals in the dark. You should not take any chances when out there so having a bright, durable, shockproof, and weather resistant flashlight is important. That’s what a tactical flashlight gives you.

Features to look for in a good tactical flashlight

Is there the need of having a tactical flashlight that you cannot rely on in different situations? A tactical flashlight should be reliable and durable in all areas. This is by providing bright light to functioning in different weather conditions. Here are some of the features to consider looking for in a quality flashlight:

  • The type of material the flashlight is made with should be durable and lightweight
  • The flashlight should be very bright with powerful lumens
  • The light should be able to provide both a focused and wide beam for different situations
  • The flashlight should have a long runtime
  • It should work in different weather conditions and temperature
  • The flashlight should be compactly designed with a firm grip for easy handling
  • It should come with additional features like pocket clip and lanyard for easy storage while in action.
  • The flashlight should have different light modes to manage the runtime and be efficient in use.

If you are a Prepper, I hope you have found this information on tactical flashlights to be of great importance. As you can see from above, a tactical flashlight can save you in many situations and be used in various ways. So, instead of carrying a heavy defense weapon, carry a tactical flashlight which can save you in different situations that other weapons can’t.

When selecting a tactical flashlight, ensure that you go for the best. It should be bright, have different light modes, constructed durably, waterproof, shock-resistant, and compact in design. As you go out into the wild, you will always be grateful to have such a tool with you. Contact us for more information.

Read More
How to Choose Flashlights

Fire tower on a mountain

Although headlamps have surged in popularity, flashlights remain a good choice whenever a handheld light is preferred, such as:
  • any time you want the strongest portable beam available.
  • when dexterity and precision in controlling the light is important.
  • being able to set down a light to work on a task.
  • signaling.

Advances in LED (light-emitting diode) technology and battery efficiency have resulted in flashlights that are smaller, lighter and brighter than they were just a few years ago.

What is the best LED flashlight for you? This article will help you narrow your selection.


Understanding Your Flashlight Choices

The key factors to compare when selecting a flashlight:

  • Light output
  • Battery type and run time
  • Size and weight

Flashlights range from under $20 to over $200, yet they may be the same size. What are the differences? Brightness is the biggest one. A pricier light is more powerful due to the use of advanced bulb, battery and circuitry technology. A rechargeable battery can add to the cost, as can features such as strong impact- and water-resistance, effective heat dissipation and multiple lighting modes.

Shopping in person? Check out the following:

  • How does the light switch on and off? Could it be inadvertently switched on inside your pack? Or, if you plan to use it in cold conditions, how easily could you switch it on or off wearing gloves?
  • Does it appear rugged enough (or, conversely, light enough) for your needs?
  • How does it feel in your hand?
  • Is a tool required to change batteries?

Flashlight Performance

Introduced in 2009, ANSI FL1 standards for flashlights ensure that models are tested and rated in the same way. Compliance with these standards is voluntary and the manufacturers do their own testing, but most major brands now include the following performance data on their packaging.

Light Output

Light output icon

Measured in lumens. This is a measure of the intensity of the light coming out of the flashlight, on the highest brightness setting powered by new batteries. It may also be shown for multiple light settings. This is a great comparison tool, but does not tell the whole story about brightness.  Beam intensity, distance and type all influence the effectiveness of a light in different applications. Light output can range from a modest 20 lumens (great for reading a book) to a terrain-scorching 3500 lumens.

Beam Distance

Beam distance icon

Measured in meters. This is how far the light will shine before the brightness diminishes to the equivalent of the light from a full moon. Full moon illumination is considered adequate for safe and careful travel outdoors.  This distance will vary with the brightness setting selected.

Run Time

Run time icon

Measured in hours. How long does it take the light output to drop to 10% of the rated output on new batteries, rounded to the nearest quarter hour. Light output may gradually decrease over time, or remain largely constant and then suddenly decrease.  Run time is commonly given for each light setting. A Runtime graph, if available, provides the best illustration of the performance of a light over time.

Impact Resistance

Impact resistance

Measured in meters. Lights are tested by dropping them 6 times onto concrete at the rated distance. This test is primarily to ensure the light remains functional after occasional accidental drops. It is not a test of resistance for a light being run over, being struck with a heavy object or being used to strike other objects.

Water Resistance

Rated using the IPX system. Water resistance is important if using your light in the rain or around bodies of water. Three ratings are used:

Water resistance icon


Indicates an IPX4 rating, which is splash resistant from all angles, after the impact test has been applied.


Indicates a water submersion rating, also after the impact test.

IPX7 – temporary immersion: up to 30 minutes at a depth of 1m.
IPX8 – submersion: up to 4 hours at the specified depth.

Additional Features and Functions

Some or all of these non-ANSI-rated attributes will also influence your flashlight selection:

Bulb Type

Advancements in LED technology have rendered other bulb types almost obsolete. Incandescents such as krypton bulbs still exist in a few flashlight models, but it is hard to beat the energy efficiency, run time, impact resistance and brightness options of an LED flashlight.

Beam Type

The lens reflector that surrounds a bulb influences how the light is dispersed. The 3 common options:

Flood (or fixed): A single beam width. Good for general tasks in camp or while walking.

Spot (or focused): A single beam condensed into a spotlight to penetrate a long distance. This is best for route-finding or other fast-paced activity.

Adjustable: Beam width ranges from wide to focused, or any point in-between. This means, for example, a climber looking for the next pitch would use a spot beam; to study a map, a flood beam.

Regulated Output

Lights with a regulated power supply maintain a steady, near-peak brightness level throughout most of the batteries’ life cycle. Near the end, however, light output drops off abruptly and significantly. Unregulated lights start bright then progressively grow dimmer as they drain power from the batteries.

Battery Type

The type and availability of replacement batteries is often a factor in selecting a flashlight.

Disposable: The most common battery sizes in use, AAA or AA, are readily available. CR123A is also a common choice, but is more expensive and can be harder to find. Their upside is a higher voltage output for a smaller size and weight, making possible a brighter flashlight in a smaller, lighter package.  Flashlights using D cell batteries are still available if you want a baton-sized tool for security or a light that will not get lost in a pocket.

Rechargeable: Built-in lithium-ion batteries can be recharged through a USB connection from a computer, AC or DC outlet or solar panel. The higher upfront cost is more than made up for by the low ongoing running cost, no need for disposable batteries and reduced waste.

Renewable: Flashlights with a built-in battery energized by a hand crank or solar panel are ideal for emergency kits.

Caution: Do not use lithium or lithium-ion batteries with any flashlight unless recommended by the manufacturer. You risk damaging a light by mismatching it with lithium batteries.


A single setting is sufficient for general-purpose use. Some models offer 2 or more modes like low, medium, high and boost). You may rarely use more than one mode, but having the option to throw an extra-strong beam on demand can be reassuring.  The brighter the mode, the shorter the runtime. Some models may offer special modes like a strobe or SOS feature.  User programmable modes or mode sequencing may be an option.  This may be a feature that is integrated into the flashlight, or set up on software and downloaded to the light via a USB cable.


The type of on/off and lighting mode switches is important for some users. Push buttons and sliders are typically thumb operated. A rotating bezel can also serve as a switch, requiring 2 hands to operate. A safety lock feature prevents the light from being accidentally turned on, helping prevent unexpected flat battery exasperation and inconvenience.

Some lights feature a silent (non-clicking) insta-beam function in which slightly depressing the switch activates the light until either a full click leaves it on, or releasing the switch turns it off, without having to cycle through all modes. This is a desirable feature in law enforcement operations.

Materials and Shape

Most flashlight bodies are either plastic or aluminum alloy. Some feature stainless steel in the head of the flashlight for extra impact resistance. Not all aluminum bodies are the same—thinner styles are lighter, thicker ones are tougher.

Cylindrical bodies are the most common shape, but as these tend to roll around when laid on a surface, some models are profiled to resist rolling. Additionally, the surface of the body may have a knurled pattern to provide grip and reduce slipping.

Size and Weight

This is mostly personal preference. A larger, heavier unit is not necessarily brighter, but it is likely to feature an extended run time due to a greater battery capacity.


Add-ons that may be included or sold separately include a lanyard, belt clip or holster, and lens filters and diffusers to provide lighting options.

Read More
Everything You Need to Know About Bike Lights

When it comes to biking in the dark, bike lights come in handy. In fact, they’re the law in many states, however, it’s not as simple as you might think.


While exact requirements can vary according to your state of residence, most states have laws that require bike lights between sunset and sunrise or during limited visibility conditions. In addition to these laws, all new bikes must be equipped with a white reflector on the front of the bike and a red reflector on the rear. These can be removed by the owner without penalty, though you will need to use some form of a lighting device when operating your bike at night.

Though there is no federal code requiring lights, most state laws for bicycle lights are similar to this example taken from the Oregon Vehicle Code (ORS 815.280):

At the times described in the following, a bicycle or its rider must be equipped with lighting equipment that meets the described requirements:

  1. The lightning equipment must be used during limited visibility conditions.
  2. The lighting equipment must show a white light visible from a distance of at least 500 feet to the front of the bicycle.
  3. The lighting equipment must have a red reflector or lighting device or material of such size or characteristic and so mounted as to be visible from all distances up to 600 feet to the rear when directly in front of lawful lower beams of headlights on a motor vehicle.


On almost any decent bike light you purchase, you’ll have a variety of modes to choose from. Which mode is ideal for you depends on the weather conditions, time of day and length of your ride.

Here’s a quick guideline for when to use each setting:


The flash or burst mode can help you to be seen on urban roads when you’ll need to grab the attention of other motorists. These modes can be more dangerous at night because they won’t allow you to see the road and can make it more difficult for other motorists to judge your speed and distance. Keep in mind that the flash and burst mode preserves the life of your battery, so it can be an option when your battery power is limited on lengthy early morning or evening training rides.


This setting drains your battery the quickest (usually in an hour or two), but is also the safest when riding at night. A beam light helps you see the road when street lights are limited and is always a good option when you’re away from the city. If you are riding in an urban area at night, pairing a high beam light with a cheaper flashing light is the way to go for both the front and rear of your bike when possible. This help you see the road and grab the attention of other motorists.


During early morning and evening hours when sunlight might be limited or during medium- to long-training rides when battery life could be an issue, using the constant beam in a lower power setting might be the best option. Using a lower power setting can, in some cases, double your run time while still providing a constant stream of light for other motorists to judge your speed and distance. The medium or low setting also provides some additional light on the road surface — which is helpful for locating potholes and other hazards that may be difficult to pick up with the flash mode.


To see the road and to be seen by other vehicles, you’ll need to purchase a good front and rear bike lights. In general, there are three different types of bike lights:


These lights offer a high number of lumens for maximum illumination on the road so you can see where you’re going. They are higher priced and often have a high-powered beam for riding on roads without street lights.


The primary purpose of safety lights is to help motorists see you. Many options feature very bright LED lights suitable for daytime and nighttime use. Various mounting options and the type of battery used (rechargeable or disposable) affect the price point. Since these lights aren’t meant to help you see where you’re going, they are generally less powerful and cost less than high-output lights.


Often available as a helmet or front handlebar mount, off-road lights are some of the most expensive lights on the market because they are brighter and transmit a wider beam of light than road models to help you see the trail in complete darkness. Because of the power required to operate these lights, run time is often limited.


If you want some affordable bike lights you just contact us.

Read More
The best 2021 front lights for cycling: Our big beam comparison engine plus how-to-choose guide

The best 2021 front lights for cycling: Our big beam comparison engine plus how-to-choose guide

Everything you need to know about what to put on your bars to light your way

When the nights draw in (or you get tempted by warm summer evenings to ride into the dark), you need to make sure you’ve got a set of lights on your bike. It’s the law in the UK to run them after dark, and they’re a major safety aid about town as well as letting you see where you’re going in the dark lanes.

  • The days of feeble incandescent lights are long gone. Light-emitting diodes (LEDs) have taken over as the source of bike illumination. They’re robust, efficient, and very cheap to run.
  • Smaller lights are plenty bright enough to get you seen at night. Need to see where you’re going? Look for output of about 500 lumens and up.
  • All but the cheapest lights are rechargeable, usually via a micro-USB port so you can use a common charger or your office computer
  • Our lights comparison engine shows you the all-important differences in where the light ends up, showing that total lumens aren’t the only measure of good light.
  • Want lighting that’s truly ever ready? Take a look at a dynamo system: no recharging needed and you can’t leave them at home.

If you’re in the market for some bike lights there’s a bewildering array to choose from, at prices ranging from a few quid to nearly a grand, so what’s the best bet for your riding? To help you choose here’s the road. check the guide to the technology and the options available for your front light.

The light beam comparison engine

Let there be lights! The 2019 Front Light Beam Comparison engine is  live – helping you compare the beams of this year's top bike lights |

Our beam test comparison data contains beam shots and data for 27 of this year’s cycling front lights, as well as all our historical data going back to 2015. So you can directly compare one with another. After it, we take a look at the various options in lighting technology and recommend some of our favorite lights.

If you have a nice big screen you can click here for the widescreen version (1400x1000px)

Read More
What do personal injury lawyers look for?

The objective of personal injury law is to make individuals whole after getting involved in an accident due to somebody’s intentional or careless behavior. This category of law seeks to find solution to wrongful acts that don’t lead to criminal behavior, though in some instances there is an overlap. Personal injury law is abroad area and lawyers can opt to concentrate on representing plaintiffs. Personal injury lawyers specialize in defending individuals who have been involved in accidents. These lawyers examine whether or not the plaintiff has a genuine claim, file the required court documents and offer advice on whether it is better to attempt to reach settlement or proceed to full trial.

What do personal injury lawyers look for?

One of the very first concerns by a personal injury lawyer is how the accident actually occurred. So as to hold somebody financially responsible, they breached a legal duty or in simple terms did something wrong that resulted to the injury. It is not sufficient that the injury just occurred or injuries suffered are severe.

In order to have a valid injury claim, the accident victim must be able to provide enough evidence to show that the other party was at fault. In case you are the one at fault the lawyer may reject your case since the monetary award will be less or rejected based on the extent of your fault. Thus, a personal injury lawyer will evaluate whether legal accountability can be determined and gauge the probability of success.

The injury is not much serious

Personal injury lawyers look for damages as a measure of the expected recovery for tackling the case. When it comes to personal injury cases, how worse you are hurt is the most critical factor in a case. If the injuries are minor, the lawyer may not take up your case because the expected monetary benefit will likewise be lower.

In addition, the cost of building up the evidence to prove up your injuries has to be considered in the assessment of the lawyer. If the expected depositions cost exceeds the expected return on the case, the lawyer will likely fail to accept the case.

You appear to have spoken to many other attorneys

Most cases are dropped because prospect client appears to be looking to choose the lawyer based on the response they get on the value of the case. It close to impossible for a lawyer to give a client a case value before the lawyer determines all facts not forgetting the defendant’s insurance coverage. Personal injury victims should be wary of lawyers who place a value on a claim immediately after the first consultation.

Moreover, if you have been rejected by another law firm the lawyer will have a second thought about the case from either a liability standpoint or an unjustifiable expectation viewpoint.

The economic reality of the case

Personal injury lawyers based on eventuality fee basis. This means that the attorney will have to make a business decision on every case they accept to handle. In addition to the business judgement are things like, the out of pocket cost required for the lawyer to build the case, the amount of time the lawyer expects to use in the case and the overall fee expected. The lawyer must deliberate whether the time effort and money are worth it before he makes a decision of moving forward with the case.

To elaborate this, defense lawyers are paid on hourly rate based on every minute the take on a matter. The client is required to make upfront payment of the case expenses and the defense lawyer is paid irrespective whether he wins or loses the case.

Another scenario that proved hard is when the personal injury victim has suffered considerable injuries and also huge hospital bills to settle. This can come into consideration when the insurance cover available to cover the damages is inadequate and the hospital will be the first priority to get the money from the case.

In a nutshell, lawyers who take up personal injury cases on contingency fee basis must be business individuals and accept or reject cases after assessing the time and amount of money they must spend to have the case moved forward balanced against the ultimate fee that is expected to be received from the client should they win the case.


Read More